WireSizing
Wire gauge reference & calculator

5 HP Motor — Full-Load Amps

Full-load ampere values for a 5-horsepower motor at every standard voltage and phase configuration listed in the NEC.

Single-Phase AC (Table 430.248)

Voltage Full-Load Amps
115 V56
200 V32.2
208 V30.8
230 V28

Three-Phase Induction (Table 430.250)

Voltage Full-Load Amps
115 V—
200 V17.5
208 V16.7
230 V15.2
460 V7.6
575 V6.1
2300 V—

DC (Table 430.247)

Voltage Full-Load Amps
90 V—
120 V40
180 V27
240 V20
500 V—
550 V—

Two-Phase 4-Wire (Table 430.249)

Voltage Full-Load Amps
115 V—
230 V13.2
460 V6.6
575 V5.3
2300 V—
← 3 HP 7-1/2 HP →

Frequently Asked Questions

How many amps does a 5 HP motor draw?

The NEC tables list the full-load current for a 5 HP motor at each standard voltage and phase configuration. These are design values for sizing conductors and protection, not nameplate ratings. See the table above for all voltages.

What size wire do I need for a 5 HP motor?

Size the branch-circuit conductors at 125% of the table FLA (NEC 430.22). Look up the FLA for your voltage above, multiply by 1.25, then find that ampacity in the wire size tables.

Related

← All motor FLA tables AWG wire chart → Breaker size charts →

WireSizing.com is an independent reference. NEC® is a registered trademark of the NFPA. Values shown are commonly published engineering data; always confirm against the edition adopted in your jurisdiction and consult a licensed electrician.