WireSizing
Wire gauge reference & calculator

15 HP Motor — Full-Load Amps

Full-load ampere values for a 15-horsepower motor at every standard voltage and phase configuration listed in the NEC.

Three-Phase Induction (Table 430.250)

Voltage Full-Load Amps
115 V—
200 V48.3
208 V46.2
230 V42
460 V21
575 V17
2300 V—

DC (Table 430.247)

Voltage Full-Load Amps
90 V—
120 V—
180 V—
240 V55
500 V27
550 V24

Two-Phase 4-Wire (Table 430.249)

Voltage Full-Load Amps
115 V—
230 V36
460 V18
575 V14
2300 V—
← 10 HP 20 HP →

Frequently Asked Questions

How many amps does a 15 HP motor draw?

The NEC tables list the full-load current for a 15 HP motor at each standard voltage and phase configuration. These are design values for sizing conductors and protection, not nameplate ratings. See the table above for all voltages.

What size wire do I need for a 15 HP motor?

Size the branch-circuit conductors at 125% of the table FLA (NEC 430.22). Look up the FLA for your voltage above, multiply by 1.25, then find that ampacity in the wire size tables.

Related

← All motor FLA tables AWG wire chart → Breaker size charts →

WireSizing.com is an independent reference. NEC® is a registered trademark of the NFPA. Values shown are commonly published engineering data; always confirm against the edition adopted in your jurisdiction and consult a licensed electrician.