WireSizing
Wire gauge reference & calculator

75 HP Motor — Full-Load Amps

Full-load ampere values for a 75-horsepower motor at every standard voltage and phase configuration listed in the NEC.

Three-Phase Induction (Table 430.250)

Voltage Full-Load Amps
115 V—
200 V221
208 V211
230 V192
460 V96
575 V77
2300 V20

DC (Table 430.247)

Voltage Full-Load Amps
90 V—
120 V—
180 V—
240 V255
500 V123
550 V111

Two-Phase 4-Wire (Table 430.249)

Voltage Full-Load Amps
115 V—
230 V166
460 V83
575 V66
2300 V18
← 60 HP 100 HP →

Frequently Asked Questions

How many amps does a 75 HP motor draw?

The NEC tables list the full-load current for a 75 HP motor at each standard voltage and phase configuration. These are design values for sizing conductors and protection, not nameplate ratings. See the table above for all voltages.

What size wire do I need for a 75 HP motor?

Size the branch-circuit conductors at 125% of the table FLA (NEC 430.22). Look up the FLA for your voltage above, multiply by 1.25, then find that ampacity in the wire size tables.

Related

← All motor FLA tables AWG wire chart → Breaker size charts →

WireSizing.com is an independent reference. NEC® is a registered trademark of the NFPA. Values shown are commonly published engineering data; always confirm against the edition adopted in your jurisdiction and consult a licensed electrician.