WireSizing
Wire gauge reference & calculator

3" Flexible Metal (FMC) Conduit Fill Chart

14 AWG THHN
291
conductors max
12 AWG THHN
212
conductors max
10 AWG THHN
134
conductors max
Usable area at 40% fill: 2.828 in² · NEC Chapter 9, Tables 1, 4 and 5

About Flexible Metal (FMC) (Flexible Metal Conduit (FMC))

Spiral-wound interlocked steel or aluminum “Greenfield”. Used for short whips to motors, fixtures and equipment that vibrates or needs to move. Trade size 3" is covered by NEC Article 348, and its internal dimensions come from NEC Chapter 9, Table 4.

3" Flexible Metal (FMC) — Internal Area & Fill Limits

Trade size3"
Total internal area (100%)7.069 in²
1 conductor (53%)3.747 in²
2 conductors (31%)2.191 in²
Over 2 conductors (40%)2.828 in²

3" Flexible Metal (FMC) — Max THHN / THWN-2 Conductors

Wire size Area (in²) Max conductors
140.0097291
120.0133212
100.0211134
80.036677
60.050755
40.082434
30.097329
20.115824
10.156218
1/00.185515
2/00.222312
3/00.267910
4/00.32378
250 kcmil0.39707
300 kcmil0.46086
350 kcmil0.52425
400 kcmil0.58635
500 kcmil0.70734
600 kcmil0.86763
700 kcmil0.98873
750 kcmil1.04962
800 kcmil1.10851
900 kcmil1.23111
1000 kcmil1.34781
Conductor areas from NEC Chapter 9, Table 5 (THHN, THWN, THWN-2). Counts assume all conductors are the same size and insulation type.

3" Flexible Metal (FMC) — Max XHHW / XHHW-2 Conductors

Wire size Area (in²) Max conductors
140.0139203
120.0181156
100.0243116
80.043764
60.059048
40.081434
30.096229
20.114624
10.153418
1/00.182515
2/00.219013
3/00.264210
4/00.31979
250 kcmil0.39047
300 kcmil0.45366
350 kcmil0.51665
400 kcmil0.57825
500 kcmil0.69844
600 kcmil0.87093
700 kcmil0.99233
750 kcmil1.05322
800 kcmil1.11221
900 kcmil1.23511
1000 kcmil1.35191
XHHW and XHHW-2 have no nylon jacket, so below 4 AWG they are physically larger than THHN and fewer fit. Areas from NEC Chapter 9, Table 5.

How the 40% conduit fill rule works

Conduit fill is a pure area calculation. Take the internal area of the raceway from NEC Chapter 9, Table 4, multiply by the allowable percentage from Table 1, then divide by the area of one conductor from Table 5. Round down, except that NEC Chapter 9, Note 7 lets you round up to the next whole number when the result has a decimal of 0.8 or more and all conductors are the same size.

Max conductors = conduit area × fill % ÷ conductor area (Note 7 rounding)

For 3" Flexible Metal (FMC) with 12 AWG THHN: 7.069 × 0.40 ÷ 0.0133 = 212.60 → 212 conductors

Nipples are the exception: a conduit or tubing length not exceeding 24 inches between boxes or enclosures may be filled to 60% per NEC Chapter 9, Table 1, Note 4. For 3" Flexible Metal (FMC) that raises the usable area from 2.828 in² to 4.241 in².

Other Flexible Metal (FMC) Sizes

3" in Other Conduit Types

Frequently Asked Questions

How many wires fit in 3-inch Flexible Metal Conduit conduit?

A 3-inch Flexible Metal Conduit conduit has 7.069 square inches of internal area. With more than two conductors the NEC limits fill to 40%, or 2.828 in². That works out to 212 #12 THHN, 291 #14 THHN, 134 #10 THHN, or 77 #8 THHN conductors.

How many 12 AWG THHN wires fit in 3-inch Flexible Metal Conduit?

212 conductors. Each 12 AWG THHN wire is 0.0133 in² per NEC Chapter 9, Table 5, and the 40% fill area of 3-inch Flexible Metal Conduit is 2.828 in².

What is the maximum fill percentage for conduit?

NEC Chapter 9, Table 1 sets three limits: 53% for a single conductor, 31% for exactly two conductors, and 40% for three or more. The lower two-conductor figure exists because two round conductors pack poorly inside a round raceway.

Related

Conduit fill calculator → All conduit fill charts → Ampacity tables →