WireSizing
Wire gauge reference & calculator

400 kcmil Wire

400 kcmil conductor specifications: 400,000 circular mils (202.68 mm²), 335A ampacity (copper, 75°C). Conduit fill, resistance and voltage-drop data.

Area
202.68 mm²
400,000 cmil
Ampacity (Cu)
335A
75°C — Table 310.16
Ampacity (Al)
270A
75°C — Table 310.16
Resistance (Cu)
0.0321
Ω/1000 ft at 75°C

400 kcmil Ampacity (Table 310.16)

Material 60°C 75°C 90°C
Copper280335380
Aluminum225270305
30°C ambient, not more than three current-carrying conductors in raceway, cable or earth.

400 kcmil Free-Air Ampacity (Table 310.17)

Material 60°C 75°C 90°C
Copper455545615
Aluminum355425480
Single conductor in free air, 30°C ambient.

400 kcmil Conduit Fill (THHN, 40%)

400 kcmil Insulated Conductor Dimensions

Insulation Diameter (in) Area (in²)
THHN / THWN-20.8640.5863
XHHW / XHHW-20.8580.5782
THW / THHW0.9180.6619
RHH / RHW-21.0480.8626

400 kcmil Voltage Drop (3%, copper)

Load 120V 1ϕ 240V 1ϕ 208V 3ϕ 480V 3ϕ
100 A560 ft1121 ft1122 ft2589 ft
150 A373 ft747 ft748 ft1726 ft
200 A280 ft560 ft561 ft1294 ft
250 A224 ft448 ft448 ft1035 ft
300 A186 ft373 ft374 ft863 ft
Maximum one-way distances. Based on 0.0321 Ω/1000 ft (stranded copper at 75°C, NEC Chapter 9 Table 8).
← 350 kcmil 500 kcmil →

Frequently Asked Questions

How many amps can 400 kcmil wire carry?

400 kcmil copper is rated 280 A at 60°C, 335 A at 75°C and 380 A at 90°C in conduit or cable (Table 310.16). Aluminum is rated 225, 270 and 305 A. Most terminations are 75°C-rated, so the 75°C figure is normally used.

What size conduit do I need for 400 kcmil wire?

Three 400 kcmil THHN conductors need at least the conduit size shown in the fill table above. Add the ground wire’s area for the actual installation.

What is the diameter of 400 kcmil wire?

The bare conductor is 400,000 circular mils (202.68 mm²). With THHN insulation the overall diameter is about 0.864 in and the area is 0.5863 in².

Explore

Conduit fill charts → Ampacity tables → Full AWG chart → Wire size calculator →

WireSizing.com is an independent reference. NEC® is a registered trademark of the NFPA. Values shown are commonly published engineering data; always confirm against the edition adopted in your jurisdiction and consult a licensed electrician.