WireSizing
Wire gauge reference & calculator

750 kcmil Wire

750 kcmil conductor specifications: 750,000 circular mils (380.03 mm²), 475A ampacity (copper, 75°C). Conduit fill, resistance and voltage-drop data.

Area
380.03 mm²
750,000 cmil
Ampacity (Cu)
475A
75°C — Table 310.16
Ampacity (Al)
385A
75°C — Table 310.16
Resistance (Cu)
0.0171
Ω/1000 ft at 75°C

750 kcmil Ampacity (Table 310.16)

Material 60°C 75°C 90°C
Copper400475535
Aluminum320385435
30°C ambient, not more than three current-carrying conductors in raceway, cable or earth.

750 kcmil Free-Air Ampacity (Table 310.17)

Material 60°C 75°C 90°C
Copper655785885
Aluminum515620700
Single conductor in free air, 30°C ambient.

750 kcmil Conduit Fill (THHN, 40%)

750 kcmil Insulated Conductor Dimensions

Insulation Diameter (in) Area (in²)
THHN / THWN-21.1561.0496
XHHW / XHHW-21.1581.0532
THW / THHW1.2181.1652
RHH / RHW-21.3481.4272

750 kcmil Voltage Drop (3%, copper)

Load 120V 1ϕ 240V 1ϕ 208V 3ϕ 480V 3ϕ
100 A1052 ft2105 ft2106 ft4861 ft
150 A701 ft1403 ft1404 ft3241 ft
200 A526 ft1052 ft1053 ft2430 ft
250 A421 ft842 ft842 ft1944 ft
300 A350 ft701 ft702 ft1620 ft
Maximum one-way distances. Based on 0.0171 Ω/1000 ft (stranded copper at 75°C, NEC Chapter 9 Table 8).
← 700 kcmil 800 kcmil →

Frequently Asked Questions

How many amps can 750 kcmil wire carry?

750 kcmil copper is rated 400 A at 60°C, 475 A at 75°C and 535 A at 90°C in conduit or cable (Table 310.16). Aluminum is rated 320, 385 and 435 A. Most terminations are 75°C-rated, so the 75°C figure is normally used.

What size conduit do I need for 750 kcmil wire?

Three 750 kcmil THHN conductors need at least the conduit size shown in the fill table above. Add the ground wire’s area for the actual installation.

What is the diameter of 750 kcmil wire?

The bare conductor is 750,000 circular mils (380.03 mm²). With THHN insulation the overall diameter is about 1.156 in and the area is 1.0496 in².

Explore

Conduit fill charts → Ampacity tables → Full AWG chart → Wire size calculator →

WireSizing.com is an independent reference. NEC® is a registered trademark of the NFPA. Values shown are commonly published engineering data; always confirm against the edition adopted in your jurisdiction and consult a licensed electrician.